| |
| |
| Punches DIN 9861 - ISO 8020
Steels:
WS: alloyed chrome - vanadium tool steel
HWS: high alloyed tool steel 12% chrome
HSS: high speed steel
ASP2023: powder metallurgical steel
Dimensions range: from Ø 0,5 to Ø 22 mm
Lengths: 71-80-100 mm
Further dimensions, lengths and materials available on request
Executions:
DIN 9861 with conical head 60°
Form D-DA-C-CA in steel WS - HWS - HSS - ASP 2023
ISO 8020 with cylindrical head and cylindrical or stepped shaft
ISO 8020 with ejector pins cylindrical and stepped shaft in HWS and HSS steel.
Several possibilities of surface coatings:
TIN: gold
ticn: grey
superlattice: light grey
tenifer: black | | | |  | | | | | | |
| | |  | Dowel pins DIN 6325
Dowel pins with tapped hole DIN 7979
Steel:
Alloyed steel
Dimensions:
from Ø 1,5 to Ø 25 mm
Lengths from 6 to 160 mm
Tolerances available Ex stock m6 - h6 | | | |
| | | |
 | Ejectors DIN 1530
Steels:
WS: alloyed chrome vanadium steel
Hot work tool steel: 1.2344
Executions:
DIN 1530D with conical head
Ø from 0,5 to 22 mm
Lengths from 100 to 315 mm
DIN 1530AH hardened with cylindrical head
Ø from 1,5 to 20 mm
Lengths from 40 to 400 mm
DIN 1530A nitrided polished with cylindrical head
Ø from 1,5 to 32 mm
Lengths from 100 to 1000 mm
DIN 1530A nitrided black with “ARCOR 90” coating
Ø from 1,5 to 32 mm
Lengths from 100 to 1000 mm
| | |
| | | |
 | ISO DIE SPRING
Steel:
Special alloyed steel for springs to UNI 3545 or DIN 17221 or DIN 17223
Dimensions: from Ø 10 to Ø 63 mm
Lengths: from 25 to 305 mm
Execution:
Light load: green
Medium load: blue
Heavy load: red
Extra-heavy load: yellow
Polyurethane springs
Retflex springs
Material:
Polyurethane or Adiprene
Dimensions: from Ø 16 to Ø 125 mm
Lengths: 250 or 500 mm
Execution:
Poliurethane:
80 Shores: green
90 Shores: red
95 Shores: yellow
retflex:
80 Shores: yellow
90 Shores: red
95 Shores: ochre | | |
| | | |
 | Blade ejectors hardened and nitrided
ejector sleeves hardened and nitrided following DIN 16756
Steels:
WS: alloyed chrome-vanadium tool steel
Hot work tool steel: 1.2344
Executions:
Blade ejectors: from Ø 4 to Ø 16 mm
Lengths: from 60 to 400 mm
Blades from 3,5 x 1 to 15,5 x 2,5
Blades lengths from 30 to 200 mm
Further dimensions and lengths available on request
Ejector sleeves DIN 16756
Inside Ø from 1,5 to 12 mm
Outside Ø from 3 to 16 mm
Lengths from 75 to 250 mm
We produce on request ejector sleeves as drawing up to 650 mm lengths. | | | | |
| | | |
|
Shoulder bolts
Class 12.9
Dimensions: from M5 to M20
Ground shaft from Ø 6 to Ø 24 mm
Lengths from L. 10 to L. 120 mm
Screw pushers
Class 5.8
Dimensions: M4 - M5 - M6 - M8 - M10 - M12 - M16
| | |  | | | | | |
| |  | Bushes and pillars for moulds
Pillars with 2 diameters type 33PT
Straight pillars type 32P
Pillars with 2 diameters type PTR
Headed guide bushes type 38PB
Straight bushes type PA
Shouldered guide bushes type PR
Shouldered guide bushes type PR in bronze
Headed guide bushes type PBR
Steels:
Case hardening steel type 16NiCr4 or 18NCD5
Dimensions: from Ø 10 to Ø 80 mm
Special pieces under drawing on request | | | | |
| | | |
|
|
